Sauna Cleaning, the process of regularly sanitizing wooden surfaces, drainage systems, and textile materials and preventing the formation of microbes and biofilms. In our villa projects in Çeşme and Alaçatı, sauna manufacturing We build them; the question we get asked most often after production is how to clean the sauna. In this article, we explain how the decisions we make during production make cleaning easier and what to keep in mind for regular maintenance.
How Should Sauna Cleaning Be?
Izmir, Çeşme, and Alaçatı are not areas where there are many problems regarding sauna cleanliness, but saunas can become hazardous if they are not cleaned regularly and properly. As Imerek Yapı, we’ve prepared an article for you with tips on sauna cleaning in Izmir, Çeşme, and Alaçatı.
Sauna Manufacturing The correct positioning of the water drains is very important for sauna cleaning. These drains should be made especially in places where the possibility of germs is most likely to be found. The biggest problem of these drains is biofilms. Biofilm is a community of microorganisms living in a gel-like layer they produce by adhering to a surface.
The most important characteristic of a biofilm is that the gel-like layer it forms prevents disinfectants from penetrating it. For this reason, simply applying chemicals to drain surfaces is often insufficient; the layer must first be mechanically removed using a brush or an abrasive surface cleaner, and then disinfected.
This method is intended only for non-metallic and metallic surfaces. Abrasive cleaners should never be used on sauna wood; they open the wood’s pores, roughen the surface—increasing the risk of splinters—and leave a larger surface area where microorganisms can take hold. For wooden surfaces, use a brush and products that are suitable for wood and do not contain chlorine.
Another aspect of sauna cleaning that is often overlooked is fabric items such as hats, peştamals, and towels.
These fabric materials should not be left damp when cleaning the sauna. It should also be cleaned after each use.
Tricks in Sauna Cleaning
The key points to keep in mind for regular and proper sauna cleaning are as follows:
- Wooden surfaces: Carefully clean the ceiling and walls with cleaning brushes; start with hot water to open the pores, then rinse with cold water.
- Choosing a cleaning product: Avoid chlorine-based cleaners; chlorine can be absorbed by the wood and released into the air when the wood is heated.
- Ventilation: Have ventilation systems that allow microorganisms to grow cleaned at regular intervals by qualified professionals.
- Sauna stove stones: Check the stones from time to time, and wash them when necessary.
- Ventilation after use: After use, leave the door open to allow the sauna to air out.
- Textile materials: Do not leave hats, peştamals, and towels damp; wash them after each use.
Experts also point out that the ideal temperature for a sauna is between 80 and 90 degrees and that the air should be humidified. For more information on sauna manufacturing and maintenance, A Detailed Guide to Sauna Construction and Maintenance‘...as well as for other wet areas with wooden surfaces Bath Manufacturing You can check out our page.
Although this article, in which we provided detailed information on sauna cleaning in Izmir, Çeşme, and Alaçatı, has come to an end, there are ways you can always reach us. For sauna manufacturing, please contact us at Contact You can easily reach from our page.
Frequently Asked Questions
How often should a sauna be cleaned?
Textile items (towels, peştamals) should be cleaned after each use, while wooden surfaces and drainage systems should be cleaned at regular intervals.
Can chlorine-based products be used to clean a sauna?
No. Since chlorine can be absorbed by the wood and released into the air when the sauna is heated, chlorine-free cleaning products should be used.
How do you clean the biofilm in a sauna drainage system?
Since the gel-like layer of the biofilm does not allow the disinfectant to penetrate, chemical treatment alone is not sufficient. On drains and metal surfaces, the biofilm must first be mechanically removed (using a brush or an abrasive surface cleaner), followed by disinfection. This method should not be used on sauna wood.
Does İmerek Yapı also offer sauna maintenance services?
İmerek Yapı primarily provides sauna manufacturing services; you can contact us through our Contact Us page for advice on maintenance and cleaning.
